DIC Degasser Module For Original DIC-EF-AG2 UltiFuzor Degas Modules For flora/wit-color/JHF/dongchuan Printer

New Arrival DIC Degasser Module For Original DIC-EF-AG2 UltiFuzor Degas Modules For flora/wit-color/JHF/dongchuan Printer
Degasser Module - EF-AG2


This degassing module is a hollow fiber membrane contactor designed for efficient removal of dissolved gases from ink jet inks on-board ink jet printing systems.
SKU: EF-AG2
Manufacturer part number: EF-AG2


This degassing module is a hollow fiber membrane contactor designed for efficient removal of dissolved gases from ink jet inks on-board ink jet printing systems.

Specifications:

Size : 126 mm x Ø 29 mm (4.96 in x Ø 1.14 in)

Weight : approximately 21g (0.046 lb)

Materials:
Hollow fiber : Poly (4-Methylpenten-1)
Housing : Polypropylene
End cap : Polypropylene
Sealing resin : Epoxy resin

Surface area of membrane: Approximately 0.06 m2 (0.65 ft2)

Performance of module (with water): 
Treated water DO: Less than 0.2 kPa (0.002 bar, 0.029 psi) (Under test conditions)
Pressure drop: Less than 0.2 kPa (0.002 bar, 0.029 psi) (Under test conditions)
Flow rate : 0.5 - 170 ml/min

Use conditions:
Liquid temperature: 5-45°C (41-113 °F)
Maximum liquid pressure (Gauge) : 200kPA (2bar, 29psi)
Vacuum pressure (absolute):
Aqueous liquid: Saturation vapor pressure ~100kPa (1 bar, 14.5 psi)
Non-aqueous liquid: 1 kPa~100kPa (1bar, 14.5 psi)
Operating temperature: 5~45 °C (41~113 °F)

Use/Storage conditions: Keep dry in door with temperature under 45 °C (113 °F). Handle with care. Do not expose to sunlight. Do not freeze remaining water in a module after used for any purpose.

Connecting joint: 
Water inlet/outlet : female luer
Vacuum port: female luer

Compatibility : GTXpro Bulk