Original Japan DIC Degasser Module EF-G2-B

Original Japan Separel DIC EF G2-B UltiFuzor Degas Modules For Inkjet Printers Arrival Degas Module For Flora/wit-color/JHF Text
Original Japan DIC Degasser Module EF-G2-B


DIC Degasser Module - EF-G2-B - This is the original DIC degasser that suitable for a series Canon and Fujifilm printers.
SKU: EF-G2-B


DIC Degasser Module - EF-G2-B - This is the original DIC degasser that suitable for a series Canon and Fujifilm printers. This is the original Canon Degasser for Arizona printers (3W3010117489)

Specifications:

Size : 115 mm x Ø 30 mm (4.53 in x Ø 1.18 in)
Weight : approximately 27g (0.06 lb)
Materials:
Hollow fiber : Poly (4-Methylpenten-1)
Housing : Polypropylene
End cap : Polypropylene
Sealing resin : Epoxy resin
O-ring : EPDM
Surface area of membrane: Approximately 0.06 m2 (0.65 ft2)

Performance of module (with water):
Treated water DO: Less than 0.2 kPa (0.002 bar, 0.029 psi) (Under test conditions)
Pressure drop: Less than 0.2 kPa (0.002 bar, 0.029 psi) (Under test conditions)
Flow rate : 0.5 - 180 ml/min

Use conditions:
Liquid temperature: 5-45°C (41-113 °F)
Maximum liquid pressure (Gauge) : 200kPA (2bar, 29psi)
Vacuum pressure (absolute):
Aqueous liquid: Saturation vapor pressure ~100kPa (1 bar, 14.5 psi)
Non-aqueous liquid: 1 kPa~100kPa (1bar, 14.5 psi)
Operating temperature: 5~45 °C (41~113 °F)

Use/Storage conditions: Keep dry in door with temperature under 45 °C (113 °F). Handle with care. Do not expose to sunlight. Do not freeze remaining water in a module after used for any purpose.

Connecting joint:
Water inlet/outlet : NPT 1/8
Vacuum port: NPT 1/8